VWR International 634-6002, Instruction Manual

Page: 19 / 90

11
Put the Reference in the light path, press to do blank.
Measure Samples
Put the samples in the light path, press to measure.
Print the Test Results
Press to print the test results.
Store the Test Results
Press to store the test results, input the file name by numeric keys and press
to save.
Load the Stored File
In the test interface, press to go into file selecting interface, press , to
choose the file you want, press to open.
Operation
Self-check
Remove all the blocks in the light path and close the lid of the compartment; Switch on the
power supply to begin the self-test.
Warm up
After self-test, the instrument goes into pre-warm state. For accurate test, at least 30
minutes of warm up is required.