VWR International 634-6002, Instruction Manual

Page: 39 / 90

31
press . Then users can find the D2 lamp’s usage time and the system will
ask if you are sure to reset the usage time. Press , to choose “Yes”
and then press to confirm. The system will record the usage time from
zero.
Switch On/Off W lamp
Press or use , to choose “Reset W lamp usage time” and
press . Then users can find the W lamp’s usage time and the system will
ask you if are sure to reset the usage time.
Reset the W lamp usage time
Press or use , to choose “Reset W lamp usage time” and
press . Then users can find the W lamp’s usage time and the system will
ask if you are sure to reset the usage time. Press , to choose “Yes”
and then press to confirm. The system will record the usage time from
zero.
Change Switch point
Press or use , to choose “Change Switch point” and
press to confirm. Input the wavelength point value(325—375nm)and
press to confirm.
Clock Setup
Press or use , to choose “Clock Setup”, then press to go into
“Clock Management” Interface.