Maintenance
16
Installation and Operation Manual
Explosion-Proof & FMS Refrigerator-Freezers
Maintenance
Warning
Disconnect from the power supply prior to
maintenance and servicing.
Warning
Refer servicing to qualified personnel.
Cleaning of Units: Before
Beginning
1.
Disconnect power cord from its outlet.
2.
Set the temperature control to the OFF position.
3.
The unit designs permit easy and rapid cleaning and
should not take more than a few minutes. Remember
to wear protective gloves to prevent frostbite,
especially when removing items from freezer units.
4.
Do not use abrasive scouring powders, waxes,
solvents, furniture polish, undiluted detergents or
cleansers containing petroleum products on the
surfaces of units.
Cleaning Interior/Exterior/Door
Gaskets
A solution of mild soap and water can be used for cleaning
the interior, exterior and door gaskets with a soft, clean
cloth. Rinse with clean water and dry thoroughly before
reconnecting and turning on the unit.
Condenser
With forced-fan vented units, remove the screws that
mount the grill to the unit. Pull temperature control knobs
straight out—this will expose condenser for cleaning.
Summary of Contents for 47747-222
Page 22: ...057 658 00 Rev B...
