Operation
Explosion-Proof & FMS Refrigerator-Freezers
Installation and Operation Manual
13
Operation
Caution
Do not use in the presence of flammable or
combustible materials or explosive gases.
Fire or explosion could result, causing
death or severe injury.
Start-Up Procedure
Rotate the control knob clockwise to lower the
temperature and counterclockwise raise it.
To check chamber temperature, place a dial thermometer
on a shelf in the center of the chamber. Initially, rotate the
temperature control knob to an arbitrary setting. Allow
approximately 2 hours for the temperature to initially
stabilize. Check the temperature and compare with the
dial setting.
Adjust dial further to reach the desired operating
temperature. After chamber initially stabilizes, allow 1/2 to
1 hour for the chamber temperature to stabilize after
subsequent temperature adjustments.
Because the markings on the dial do not indicate specific
temperatures, use them AS REFERENCE POINTS ONLY
for any future setting of the temperature.
If the room thermostat is turned below 60ºF at night,
consider setting the temperature control one step colder. It
should be left at this setting for the nighttime period; return
temperature control to original setting when the room
thermostat is returned to its normal setting.
Restart Procedure
If unit is unplugged or turned off, allow 3 minutes before
restarting or plugging it back in.
How to Save Energy
• Be sure to follow location suggestions as mentioned
in the previous INSTALLATION section.
• Wipe moisture from glassware or other materials
before placing them in a unit.
•
Don't overcrowd the unit. Too many items can
increase electrical energy demand in order to keep
everything cool.
Summary of Contents for 47747-222
Page 22: ...057 658 00 Rev B...
