heating element from 0% to 100%. The water heating control unit (pos. 5, fig. 2) and terminals for
electrical connection are located behind the front decorative panel of the base.
1.4.5 Wiring diagram for connecting the steamer in fig. 3.
1.5. Instrumentation
1.5.1. Steam generation is monitored and controlled using a display panel.
1.6. Marking and sealing
1.6.1. The marking is applied to the nameplate located on the body of the Product.
1.6.2. The marking complies with the requirements of Article 5 of TR CU 004/2011 and contains the
following data:
• conventional designation (type) of the product,
• trademark or name of the manufacturer,
factory number,
• device power in kilowatts,
• rated voltage of the supply network in volts,
• weight of the device in kilograms,
• year of manufacture,
• country of manufacture,
• designation of technical conditions,
• product sealing is not provided
1.7. Packaging
• The product is packed in corrugated cardboard boxes.
• Packaging and preservation of the product comply with the requirements of Section 3 of GOST
23216 for conditions
of transportation, storage and shelf life.
9