1.3
Composition
№
em
№
Name
Unit
Quantity
1
Steamer for broom ‘’PAREN’’
PCS
1
2
Manual
PCS
1
3
Packing container
PCS
1
1.4
Design and operation of the product
1.4.1
The appearance and design of the product are shown in Fig. 1 and 2.
1.4.2
The product consists of two functional blocks:
• Tank for boiling water (item 1, fig. 2).
• Container for brooms (pos. 2, fig. 2).
1.4.3
Product specification.
1.4.4
In the lower part of the Product there is a stainless steel tank (pos. 1, fig. 2) with a heating element installed in
it (pos. 4, fig. 2). Above the tank there is a container for brooms (item 2, fig. 2) made of stainless steel and lined
with wooden slats (item 6, fig. 2). The water tank and the broom container are separated by a perforated grid.
The broom container is closed with a lid (pos. 7, fig. 2).
1.4.5
On the front side of the Product there is a control panel with an indicator and buttons (pos. 3, fig. 2). The
indicator shows in percentage display from 220 V the value of voltage supplied to the heating element installed
in the water tank of the steam generator and serving to heat the water. The buttons below the indicator allow
adjusting the power level of the water.
