14
2.2.2. Operating procedure
• Remove the cover. Make sure the steamer is clean. Close the drain plug on the
drainage hose.
Pour 6 litres of water into the tank, but not more than 7 litres. Excess water will flow
out onto the floor behind the steamer.
• Place brooms (1-4 pieces) on the wire rack. Close the cover. Turn on the steamer. Set
the steam intensity to 100% on the display module using the buttons ‘UP’ and ‘DOWN’
(preparation mode).
• When boiling water in a steamer (20-25 minutes), reduce the intensity of vaporization
(boiling) to 40% sufficient for quiet boiling of water (Steaming mode). Adjust
empirically.