- 24 -
3-11. Changing Password
To protect calibration values user must enter password prior to using Calibration Menu.
Passwords are in 4 digit numeric format. The factory default password is 1234.
No.
Key Operation
Display Panel
Description
1
** OUTPUT OFF **
SET-LIMIT
SET-PASSWORD
Turn off out put by pressing
“OUTPUT
ON / OFF
” button (recommended).
Press the
“SETUP” button.
Use the arrows or the jog shuttle to
select
“SET-PASSWORD”.
2
SET-PASSWORD
Password: ****
1 2 3 4
Press the
“SETUP” button again.
To enter a new password, user must
verify previously entered password.
Use the arrows to change the location of
the cursor and use the jog shuttle to
change the value of each digit. If this is
the first time setting the password, enter
the factory default password, 1234.
3
SET-Password
New Psw ****
(ex. 4321)
Press the
“STORE” button.
Now enter the new 4 digit password
using the arrows and jog shuttle
4
** OUTPUT OFF **
P1 00.000V 0.000A
Press the
“STORE” button to save the
new password and exit the Setup.
Press
“OUTPUT ON / OFF” button again
to continue use.
3. Features
