Vulcan-Hart 176-6799, Instruction Manual

Page: 13 / 51

13
1. Remove the oil drain plug (oil level sight glass). Allow oil to drain completely.
2. Replace the oil drain plug (we recommend the use of a sealing compound or tape to
avoid leakage). Do not over-tighten.
3. Refill with the reservoir with SAE-20 (API CG/CD heavy duty), non-detergent compressor
oil or for extreme winter conditions use SAE-10 weight
4. The reservoir capacity is approximately 235 ml (8 fl.oz). Fill to the red dot in the oil level
sight glass. Do not over-fill.
CAUTION
!
l
All air line components (including hoses, pipe, connectors, filters, & regulators, etc.) must
be rated for a minimum working pressure of 150 psi or 150% of the maximum system
pressure, whichever is greater.
l
Disconnect any tools from the air supply before performing maintenance, clearing a
jammed fastener, leaving the work area, moving the tool to another location, or handing it
to another person.
l
When cleaning air filter, or any parts in direct contact with the air production, do not use
any flammable or toxic cleaner or solvent.
l
During the break-in period, nuts and bolts have a tendency to loosen up. After two weeks,
tighten all nuts and bolts including head bolts.
GENERAL MAINTENANCE
l
Keep the vents and cooling vanes clear of dust and debris. This will help prevent possible
electrical shorts and ensure proper cooling.
l
Inspect the cord regularly and have it replaced by an authorized repair facility if it is
damaged.
l
Check the tanks regularly for dents, cracks, rust, and other damage. Do not use if any
part of the pressurized system is damaged.
l
An authorized repair center should do any repairs, modification, or maintenance that
involve disassembling the compressor.
l
Please call toll-free 1-800-482-0131 with any questions you have or service advice you
may need.