SCA3000 DEMO KIT
User Manual
SETUP
display presents some operational
parameters of selected sensor type, please
refer to component specific documentation
for further information.
The used virtual serial COM port number
can be viewed from "Serial port" display.
This information is needed if the CMA3000
DEMO KIT is used without the GUI
software, see further details from
section
5
.
In this example the CMA3000 DEMO KIT
uses COM39 serial port.
Figure 10. Setup display.
RESET DEMO
initialises the GUI software.
The embedded MCU software version is
presented also. SCROLL display opens
after RESET by default.
Figure 11. Reset demo display.
VTI Technologies Oy
9/21
www.vti.fi Doc.Nr.
8288400.02 Rev.0.2
electronic components distributor
