SCA3000 DEMO KIT
User Manual
VTI Technologies Oy
7/21
www.vti.fi Doc.Nr.
8288400.02 Rev.0.2
MOTION DETECTION
, CMA3000 is
set to motion detection with
configuration where operation mode is
changed to normal measurement
mode when motion is detected.
CMA3000 acceleration output is band
pass filtered in motion detection
mode. The transition from motion
detection mode to normal
measurement is presented in Figure
6.
When motion is detected,
the operation mode is
changed automatically to
normal measurement mode
Figure 6. Scroll display with detected motion.
BUBBLE LEVEL
, two displays that
show tilt angle, see Figure 7. Angle
calculation is performed in GUI, not in
CMA3000 sensor.
CMA3000 sensor averaging can be
enabled / disabled.
Figure 7. Bubble level display.
electronic components distributor
