VTech vt2463 User Manual Download Page 27

Page: 27 / 39

Charge the Handset Battery Pack

•

The battery pack needs charging when:
— A new battery is installed in the handset.
— The phone beeps twice every five seconds.
— The screen displays

BATTERY LOW

and the low battery icon.

•

Place the handset in the base so the CHARGING light turns on.
The battery pack is typically fully charged in 10 hours.

•

You can keep the battery fully charged by returning the handset
to the base after each use.

•

If you repeatedly get a low battery indicator, even after charging
overnight, the battery should be replaced.

CAUTION: To reduce the risk of fire or injury to persons
or damage to the telephone, read and follow these
instructions carefully:

Charge the battery provided with or identified for use with this product
only in accordance with the instructions and limitations specified in the
User’s Manual.

BATTERIES

Summary of Contents for vt2463








































Search results

Summary of Contents for vt2463

Reviews:

Related manuals for vt2463

Brands by name

Popular brands

VTech vt2463, User Manual

Search results

Summary of Contents for vt2463

Reviews:

Related manuals for vt2463

Brands by name

Popular brands