VTech vt2463, User Manual

Page: 15 / 39

15
4
When you finish entering the name, press
SELECT
or
PROG/CHANNEL
.The screen displays
ENTER NUMBER
.
5
Enter the telephone number. Use to backspace and make a
correction. Press
REDIAL/PAUSE
to store a pause in the dialing
sequence.
6
Press
SELECT
or
PROG/CHANNEL
. The screen displays
DISTINCT RING?
and the current setting.
7
Press or to change the setting. Choose
Y
(for Yes) if you wish
the phone to alert you to calls from this number by changing to a
distinctive ringing pattern after the first ring. Choose
N
(for No)
for a normal ringing pattern.
8
Press
SELECT
or
PROG/CHANNEL
to confirm your selection. If
you chose
Y
in Step 7,a
D
will be displayed with the directory entry.
Note:
When memory is full the screen displays
MEMORY FULL
, an error
tone sounds, and you will not be able to store a new number until you delete a
stored number.
Edit a Number/Name Stored in the Directory
1
Press (
DIR
). The screen displays
DIRECTORY
.
2
Press or to scroll alphabetically through entries
stored in memory
—OR—
Press the dial pad key for the first letter of the entry you want to edit.
3
When the screen displays the number you want to edit, press
SELECT
. Then press until
EDIT
flashes.
4 Press SELECT . The screen displays the name and number. The flash-
ing cursor appears at the end of the name. Use , and the dial pad
keys to edit the name. Press SELECT to move on to edit the number.
Use
and dial pad keys to edit the number. Press SELECT to move
on to edit the Distinctive Ring setting.
5
Press
SELECT
to save the edited information.
TELEPHONE DIRECTORY
DIAL
EDIT
ERASE
9735550123