VTech vt2463, User Manual

Page: 6 / 39

6
INSTALLATION
3. Charge the handset battery.
Place the handset in the base. Charge the battery for at least 12 hours the first time.
4. Check for dial tone
After the batteries are charged, connect the modular telephone cord between a live
phone jack and the jack located on the bottom of the Base Unit. Pick up the Handset
and press PHONE. You should hear a dial tone.
5. Set the dial mode.
If you have touch tone service, the phone is ready to use as soon as the batteries are charged.
If you have dial pulse (rotary) service, you’ll need to change the dial mode.
•
Press PROG/CHANNEL on the handset to enter programming mode.
• Press or until the screen displays
DIAL MODE
:
and the currently selected mode.
• Press SELECT. The current setting blinks.
• Press to select
PULSE
(or
TONE
).
• Press SELECT to save the displayed mode.
Table/Desk Installation
Connect the power cord
Connect the telephone
line cord
MODEL: 2463
DC 9V 500mA
CLASS 2 PO
WER SOURCE ONL
Y
Mic
hael Gr
av
es
MANUF
ACTURED IN CHINA
CORDLESS TELEPHONE
THIS DEVICE COMPLIES
WITH P
AR
T 15 OF
THE FCC R
ULES.
OPERA
TION IS SUBJECT
TO
THE FOLLO
WING
TW
O CONDITIONS:
1)
THIS DEVICE MA
Y NO
T CA
USE HARMFUL
INTERFERENCE;
AND
2)
THIS DEVICE MUST
A
CCEPT
ANY
INTERFERENCE RECEIVED
,
INCLUDING INTERFERENCE
THA
T MA
Y CA
USE UNDESIRED
OPERA
TION.
PRIV
AC
Y OF COMMUNICA
TIONS MA
Y NO
T BE ENSURED
WHEN
USING THIS
PHONE.
PRODUCT CONT
AINS NICKEL-CADMIUM
BA
TTER
Y
: MUST BE RECYCLED OR DISPOSED
OF PROPERL
Y
. DO NOT BURN OR PUNCTURE
BA
TTER
Y
. LIKE OTHER BA
TTERIES OF THIS
TYPE. IF IT IS BURNED OR PUNCTURED. IT COULD RELEASE T
OXIC MA
TERIAL WHICH
COULD CAUSE INJUR
Y.
Cd
POWER JACK
COMPLIES
WITH 47 CFR P
AR
T 68
REGISTRA
TION NO.:
US:
EW7W901B24280
RINGER EQ
UIV
ALENCE:
0.1B
USOC J
ACK:
RJ1
1C/RJ1
1W
HA
C
FCC ID:
EW780-5125-B01
9V DC