30
•
Your VT1970ci can answer
incoming calls in 2 different ways:
•
Normal Answering Mode. After
your personal greeting (or the
factory preset greeting, if you
choose), the VT1970ci will record
your caller ’s message. For
example:
“You have reached 555-1234. We
are unable to answer your call at
this time. Please leave a message
after the tone.”
•
If you prefer to use the factory
preset greeting, the caller will
hear:
"Hello, I'm unable to answer your
call right now. Please leave your
name, number and a message
after the tone."
•
Announce-Only Mode. After your
personal greeting (or the factory
preset greeting, if you choose), the
VT1970ci will hang up. For
example:
“Sorry, we cannot take your call.
Please call back tomorrow between
9am and 5pm”.
•
If you prefer to use the factory
preset greeting, the caller will
hear:
"Hello, I'm unable to answer your
call right now. Please call again.
Thank you."
•
Upon power-up, the Base Unit
Message Window will alternate
between CL (indicating that the
Day and Time must be set) and a
digit representing the number of
recorded messages yet to be
played.
Answering Device Programming
NOTE:
During programming, the Base Unit
Message Window displays “- -”.You
may press PLAY/STOP to exit
programming mode at any time.The
VT1970ci will automatically exit
programming mode after approximately
20 seconds of inactivity.
•
The MENU key guides you through
the 7 programming functions:
1.Set Outgoing Message
2.Set Security Code
3.Set Day and Time
4.Set Audible Message Alert
5.Set Announce Only
6.Set Base Ringer
7.Set Number of Rings
SETTING UP YOUR VT 1970ci DIGITAL ANSWERING DEVICE
vt1970ci/hjmannual
1/29/99, 12:50 PM
30
