background image

33

MENU

TIME/SET

SELECT

SETTING UP YOUR VT 1970ci DIGITAL ANSWERING DEVICE

Press  SELECT  until you hear the
correct day of the week.

Press  TIME/SET  to confirm your
selection.  The voice prompt will
announce the hour.

Press  SELECT  until you hear the
correct hour.

Press  TIME/SET  to confirm your
selection.  The voice prompt will
announce the minute.

Press   SELECT  to adjust the
minute setting.  Holding  SELECT
increases the minute setting in
increments of 10.

Press  TIME/SET  to confirm.  The
voice prompt will repeat the current
Day and Time, as programmed by
you.

Press  MENU  to advance to the
next programming function, or press
PLAY/STOP to exit programming
mode.

Set Audible Message Alert

This feature provides a beep every
10 seconds at the Base Unit,
alerting you to new, unplayed
messages.

Press  MENU  until you hear “Set
Audible Message Alert”.

Press   SELECT .  The voice
prompt will say either ON or OFF.

Select  ON if you want your VT
1970ci 
to beep every 10 seconds
to alert you to any new messages;
select OFF if you don’t.  The Base
Unit will display ON or OF (off) as
you make your selection.

Press  TIME/SET  to confirm your
selection.  The voice prompt will
say:  “Audible Message is ON (or
OFF)”.

Press  MENU  to advance to the
next programming function or press
PLAY/STOP  to exit programming
mode.

MENU

TIME/SET

SELECT

vt1970ci/hjmannual

1/29/99, 12:51 PM

33

Summary of Contents for VT 1970ci















































Reviews: