34
POWER
HS IN-USE
CHARGING
SPARE BATT
ERASE
ON/OFF
MEMO
VOL
PAGE
MENU
SELECT
900MHz
DIGITAL
CORDLESS
TIME/
SET
MENU
TIME/SET
SELECT
Set Number of Rings
•
Your VT1970ci can answer calls
after 2 rings, 4 rings, 6 rings, or Toll
Saver. In Toll Saver mode, your
VT1970ci will answer calls after 2
rings only if there are new, unplayed
m e s s a g e s i n i t s m e m o r y.
Otherwise, it will answer after 4
rings. This feature helps you avoid
long distance charges when
checking for messages from a
remote location. Therefore, using
Toll Saver, if you call your VT
1970ci, and it doesn’t pick up by
the third ring, hang up. There
aren’t any new messages for you
at this time.
SETTING UP YOUR VT 1970ci DIGITAL ANSWERING DEVICE
Set Base Ringer
•
Press MENU until you hear “Set
Base Ringer”.
•
Press SELECT to toggle between
ON and OFF. The Base Unit will
display ON or OF (off) as you make
your selection.
•
Press TIME/SET to confirm your
choice. The voice prompt will say:
•
“Base Ringer is ON (or OFF)”.
•
Press MENU to advance to the
next programming function, or press
PLAY/STOP to exit programming
mode.
NOTE:
The Base Ringer setting does not affect
the Handset ringer.
To Set the Number of Rings:
•
Press MENU until you hear “Set
Number of Rings”.
•
Press SELECT until you hear the
desired setting ( 2, 4, 6, Toll Saver).
•
Press TIME/SET to confirm your
choice. The voice prompt will say:
“Number of Rings Selected is
____”.
•
Press MENU to advance to the
next programming function, or press
PLAY/STOP to exit programming
mode.
vt1970ci/hjmannual
1/29/99, 12:51 PM
34
