12
PULSE
TONE
TONE PULSE
SELECTION
GETTING STARTED
Setting Up Your VTech VT1970ci
Choose an area near an electrical
outlet and a telephone wall jack.
AC Power Adapter
Plug the AC power adapter into an
electrical outlet and the DC connecter
to the back of the base unit.
CAUTION:
Use only CLASS 2 9V DC POWER
SUPPLY included with your phone.
Handset Ringer
The handset ringer is programmed ON
as the factory default setting. Refer to
PROGRAMMING THE RINGER for
more information.
Setting the Tone/Pulse Switch
The TONE/PULSE switch is located on
the bottom of the base unit and is
factory set to TONE. If you have touch
tone service, do not change the switch
setting. If you have rotary (Pulse)
service, set the switch to PULSE.
TELEPHONE
WALL JACK
AC
OUTLET
TEL. LINE
9V DC
CHARGE THE
HANDSET
BATTERY PACK
FOR 16 HOURS
BEFORE USING
Connect Telephone Line Cord
Plug one end of the telephone cord into
a wall jack and the other end into the
back of the Base Unit.
Charge the handset battery pack
before use. The battery pack recharges
automatically whenever the handset is
in the base unit. The batteries must
be charged for 16 hours before using
your phone for the first time.
vt1970ci/hjmannual
1/29/99, 12:48 PM
12
