VTech VS150 TWIN User Manual Download Page 70

Page: 70 / 105

ReVIew aND DIal fROm THe PHONebOOk

Entries are sorted alphabetically.

1. Press on the handset or

PHONEBOOK/

on the telephone base

when idle.

2. Press or

on the handset, or

CALLS /

PHONEBOOK /

on the

telephone base to scroll to browse
through the phonebook, or use the
dialing keys to start a name search

3. When the desired entry appears, Press

or on the handset, or press

the base to dial.

eDIT a PHONebOOk eNTRY

1. When the desired entry displays, press

EDIT

2. Use the dialing keys and

BACKSP

to edit the number, and then

press

NEXT

3. Use the dialing keys to edit the name, and then press

SAVE

save.

DeleTe a PHONebOOk eNTRY

1. When the desired entry displays, press

DELETE

2. When the screen displays

Delete contact?

, press

YES

to conir

delete.

BACK

Summary of Contents for VS150 TWIN










































































































Search results

Summary of Contents for VS150 TWIN

Reviews:

Related manuals for VS150 TWIN

Brands by name

Popular brands

VTech VS150 TWIN, User Manual

Search results

Summary of Contents for VS150 TWIN

Reviews:

Related manuals for VS150 TWIN

Brands by name

Popular brands