VTech VS150 TWIN User Manual Download Page 22

Page: 22 / 105

#/#

Index -

shows the entry number of the sensor status,

or in the sensor log, phonebook, caller ID log, or call
block list that is currently being viewed, out of the
total number of entries.

Sensor

- the garage door or contact sensor is

opened.

Missed alerts in idle mode

- displays in idle mode

when there are new missed alerts from sensors.

Armed local mode

- displays when the sensor alert

system is turned on, and is set to receive alerts
locally. Alerts are received on the telephone system
only.

Armed remote mode

- displays when the sensor

alert system is turned on, and is set to receive alerts
remotely. Alerts are received at the stored telephone
numbers.

lIgHtS oVerVIew

HandSet lIgHtS

On when the handset speakerphone is in use.

CHARGE

On when the handset is charging in the telephone
base or handset charger.

Summary of Contents for VS150 TWIN










































































































Search results

Summary of Contents for VS150 TWIN

Reviews:

Related manuals for VS150 TWIN

Brands by name

Popular brands

VTech VS150 TWIN, User Manual

Search results

Summary of Contents for VS150 TWIN

Reviews:

Related manuals for VS150 TWIN

Brands by name

Popular brands