VTech VS150 TWIN, User Manual

Page: 47 / 105

37
SeT aleRT SCHeDUle aS alwaYS ON
The default setting of sensors’ alert
schedule is
Always on
. You will receive an
announcement alert - “
Sensor X
*
is open
”
or
“
Motion X
*
sensor detected motion
”,
every time a monitored garage door
or contact sensor is opened, or there is
motion in the monitored area.
You can also set a reminder in case you
forget to close the monitored object. You
can choose to receive an alert once again if
it remains open after 5, 10, or 20 minutes.
Press SENSORS on the handset or telephone base when idle,
and then scroll to the desired sensor.
-OR-
i. Press MENU when the phone is not in use.
ii. Press or on the handset, or
CALLS /
or
PHONEBOOK/
on the telephone base to scroll to
Sensors
,
and then press SELECT .
iii. Press or on the handset, or
CALLS /
or
PHONEBOOK/
on the telephone base to scroll to the
desired sensor, and then press SELECT .
2. Press
OPTIONS
to enter the individual sensor menu.
3. Press
SELECT
to select
Set schedule
.
4. Press SELECT to select Always on . The reminder menu appears.
5. Scroll to choose
Off
,
5 minutes
,
1
0 minutes
, or
2
0 minutes
,
and then press
SELECT
to save.
NOTES
When you received the alert tone and announcement, the handset
will display
Sensor X is open or Motion X detected motion , whilst
the telephone base will display
Sensor X is open
or
Motion X sensor
detected motion .
For garage door sensor and Contact sensor, both the handset and
telephone base will also display , and the
SENSOR light on the
telephone base will turn red.
1.
•
•
*
Sensor X or Motion X refer to the sensor’s name.
X
refers to the system
-
assigned number of the sensor. You can edit the
sensor’s name to your preferred name. See Rename the sensor .
Set schedule
Open/closed 1
L