VTech SN6187 User Manual Download

Page: 52 / 127

Telephone operation

Transfer a call

While on an outside call, you can transfer the call from

a handset to another system device.

During a call, press

MENU. Press or to scroll to

Transfer, then press SELECT.

If you have two or more handsets/pendants, your

handset shows

TRANSFER TO: Press or to

scroll to the desired device and then press

SELECT. You may also enter a destination

handset number (

1-9), or enter

followed

0-2 for HANDSET 10 to HANDSET 12, or

followed by

for all devices.

The outside call is put on hold and the handset shows

Transferring call.../Transferring call to all...
The destination device rings and shows

Transferring from

HANDSET X.
To answer the call on the destination handset, press , or any
dialing key (

0-9 or

-OR-
To answer the call on the pendant, press .

If the destination device does not answer the call within 30 seconds,

the originating device displays

No response to transfer. The call

will be reverted to the originating device.
If the destination device is in use, in the phonebook or caller ID log,

not powered or out of range, the originating device displays

No answer. Try again. and then reconnects to the outside call.

•

>Transfer
Intercom

TRANSFER TO:
>All devices

Summary of Contents for SN6187
































































































































Search results

Summary of Contents for SN6187

Reviews:

Related manuals for SN6187

Brands by name

Popular brands

VTech SN6187, User Manual

Search results

Summary of Contents for SN6187

Reviews:

Related manuals for SN6187

Brands by name

Popular brands