VTech SN6187 User Manual Download Page 94

Page: 94 / 127

Appendix

Display screen messages

Microphone ON

The mute function is turned off and the other

party can hear you.

Missed Reminder

There are reminders that have not been reviewed.

Muted

The mute function is turned on. The other

party cannot hear you but you can hear the

other party.

Memory full

The answering system has no remaining

recording time.

New voicemail

There are new voicemail messages from your

telephone service provider.

No answer.
Try again.

When you send out an intercom request,

the destination device is in use, out of range,

not powered, or does not answer within

100 seconds.
When you send out a transfer request, the

destination device is in use, out of range or

not powered.

No battery

The handset in the handset charger has no

battery installed.

No line

There is no telephone line connected.

No response to
transfer

When you send out a transfer request, the

destination device does not answer within

30 seconds.

Not available at
this time

Someone else is already accessing the

phonebook, caller ID log or answering system.

Not enough batt
to power base

The cordless handset you put in the base

does not have enough charge to back up the

telephone base power.

Number already

saved

The telephone number you try to save is already

in the phonebook.

Summary of Contents for SN6187
































































































































Search results

Summary of Contents for SN6187

Reviews:

Related manuals for SN6187

Brands by name

Popular brands

VTech SN6187, User Manual

Search results

Summary of Contents for SN6187

Reviews:

Related manuals for SN6187

Brands by name

Popular brands