VTech SN6187 User Manual Download Page 102

Page: 102 / 127

Appendix

Pendant battery

It takes up to three hours for the battery to be fully charged. When it is

fully charged, you can expect the following performance:

Operation

Operating time

While in speakerphone mode (talking*)

Up to five hours

* Operating time varies depending on your actual use and the age of the battery.
The battery needs charging when:

You hear

“Low battery.”

There is an alert tone every one minute.
The pendant status light flashes red or is solid red.

Conserve battery life:

The pendant battery is not replaceable.
If the pendant will not be used for a long period of time, switch

OFF the

pendant to conserve pendant battery life.

CAUTION:

To prevent fire or shock hazard, do not expose this product to water or any

type of moisture.

•
•
•

Summary of Contents for SN6187
































































































































Search results

Summary of Contents for SN6187

Reviews:

Related manuals for SN6187

Brands by name

Popular brands

VTech SN6187, User Manual

Search results

Summary of Contents for SN6187

Reviews:

Related manuals for SN6187

Brands by name

Popular brands