VTech SN6127 Abridged User Manual Download Page 85

Page: 85 / 123

Appendix

Pendant battery

Read this section only if you have a pendant.
It takes up to three hours for the battery to be fully

charged. When it is fully charged, you can expect

the following performance:

Operation

Operating time

While in speakerphone mode

(talking*)

Up to five hours

* Operating time varies depending on your actual use and

the age of the battery.
The battery needs charging when:

You hear

“Low battery.”

There is an alert tone every one minute.
The pendant status light flashes red or is solid red.

Conserve battery life:

The pendant battery is not replaceable.
If the pendant will not be used for a long period of time,

switch off the pendant to conserve pendant battery life.

CAUTION:

To prevent fire or shock hazard, do not expose this

product to water or any type of moisture.

•
•
•

Summary of Contents for SN6127




























































































































Search results

Summary of Contents for SN6127

Reviews:

Related manuals for SN6127

Brands by name

Popular brands

VTech SN6127, Abridged User Manual

Search results

Summary of Contents for SN6127

Reviews:

Related manuals for SN6127

Brands by name

Popular brands