www.vtechphones.com
52
Problem
Suggestion
My Caller ID isn’t
working .
• Caller ID is a subscription service . You must subscribe to this service for this feature to work
on your phone .
• Your caller must be calling from an area that supports caller ID .
• Both you and your caller’s telephone companies must use caller ID compatible
equipment .
My answering machine is
not recording messages .
• Make sure system is turned
ON
(the
ANS ON/OFF
key is illuminated) .
• Make sure the announcement only feature is set to
OFF
.
I cannot hear recorded
messages .
• Using the telephone base volume control, raise the volume to a comfortable listening
level .
CL
is flashing in the
telephone base message
display window .
• You need to set the day and time . Refer to the section(s) on setting day and time in this
user’s manual .
• Make sure announce only feature is set to
OFF.
Common cure for
electronic equipment .
If the unit does not seem to be responding normally, then try putting the handset in its telephone
base . If it does not seem to respond, do the following (in the order listed):
. Disconnect the power to the telephone base .
2 . Disconnect the handset battery, and spare battery, if applicable .
3 . Wait a few minutes .
4 . Connect power to the telephone base .
5 . Re-install the battery(ies) .
6 . Wait for the handset to re-establish its link with the telephone base . To be safe, allow up to
one minute for this to take place .
Troubleshooting
