VTech LS5146 Important s Manual Download Page 89

Page: 89 / 113

www.vtechphones.com

Appendix

Battery

After the battery is fully charged, you can expect the following performance:

Operaton

Operatng tme

Whle n use (talkng)

4.5 hours

Whle not n use (standby*)

3 days

*Handset s off the telephone base but not n use.

The battery needs chargng when:

A new battery s nstalled n the handset.
The handset beeps when taken off the telephone base.

The battery indicator on the handset screen is flashing.

CAUTION:

To reduce the risk of fire or injury to persons, read and follow these instructions:

1. Use only the battery provded or equvalent. To order a replacement, vst our webste at www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

2. Do not dispose of the battery in a fire. They may explode. Check with local waste management codes for special disposal

nstructons.

3. Do not open or mutlate the battery(es). Released electrolyte s corrosve and may cause burns or njury to the eyes or

skn. The electrolyte may be toxc f swallowed.

4. Exercse care n handlng batteres n order not to create a short crcut wth conductve materals such as rngs, bracelets,

and keys. The battery and/or conductor may overheat and cause burns.

5. Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and

limitations specified in this manual.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO WATER OR ANY TYPE OF MOISTURE.

•
•
•

Summary of Contents for LS5146 Important s


















































































































Search results

Summary of Contents for LS5146 Important s

Reviews:

Related manuals for LS5146 Important s

Brands by name

Popular brands

VTech LS5146 Important s, Manual

Search results

Summary of Contents for LS5146 Important s

Reviews:

Related manuals for LS5146 Important s

Brands by name

Popular brands