VTech LS5146 Important s Manual Download Page 96

Page: 96 / 113

www.vtechphones.com

Troubleshooting

Problem

Suggeston

The battery does

not charge in the

handset or Low

Battery is constantly

displayed on the

handset.

• Make sure the handset s placed n the telephone base or charger correctly. The

CHARGE

lght

on the handset should be on.

• Remove the battery from the handset and nstall t n the spare battery compartment at the

bottom of the telephone base and let t charge for up to 24 hours. Then re-nstall the charged

battery nto the handset.

• If the handset s n the charger or n the telephone base but the

CHARGE

lght s not on, refer to

The CHARGE light is off

n the secton below.

• It may be necessary to purchase a new battery. Please refer to the

Battery

secton of ths

user’s manual.

• The telephone mght be malfunctonng. Please refer to the

Warranty

secton of ths user’s

manual for further nstructon.

Summary of Contents for LS5146 Important s


















































































































Search results

Summary of Contents for LS5146 Important s

Reviews:

Related manuals for LS5146 Important s

Brands by name

Popular brands

VTech LS5146 Important s, Manual

Search results

Summary of Contents for LS5146 Important s

Reviews:

Related manuals for LS5146 Important s

Brands by name

Popular brands