VTech LS5146 Important s Manual Download Page 8

Page: 8 / 113

www.vtechphones.com

Spare battery (optional)

You can keep a charged spare battery (purchased separately) n the telephone base. The spare battery

compartment s located at the bottom of the telephone base. The charged spare battery allows you

to quckly replace a depleted handset battery, or n the event of a power falure, make and receve

short calls for up to three hours.
To nstall and charge a spare battery:

Use only

the suppled

rechargeable

battery or

compatble

replacement

(purchased

separately).

To order a

replacement, vst

our webste at

www.vtechphones.

com or call

1 (800) 595-9511.

In Canada, go to

www.vtechcanada.

com or call

1 (800) 267-7377.

•

3. Poston the battery

compartment cover

and slde t towards the

center of the telephone

base untl t clcks nto

place.

When you have finished installing the spare battery, the battery charging icon will appear in the top

rght corner of the telephone base dsplay. It may take up to 24 hours for the spare battery to reach a

full charge. Once the spare battery s fully charged, you can keep t charged untl needed.

1. Press the tab and slde

the battery compartment

cover out of the

telephone base to open.

2. Insert the plug securely

matchng the color-

coded label nsde the

compartment. Place the

battery wth the label

THIS SIDE UP

facng up

and the wres nsde the

compartment.

Getting started

THIS SIDE UP

Battery Pack

BT5632 / BT5872

3.6V 550mAh Ni-M

W
A

RNING: DO NOT BURN OR PUNCTURE BA

TTERIE

MADE IN CHIN

THIS SIDE UP

Battery Pack

BT5632 / BT5872

3.6V 550mAh Ni-MH

W
A

RNING: DO NOT BURN OR PUNCTURE BA

TTERIES

MADE IN CHIN

Summary of Contents for LS5146 Important s


















































































































Search results

Summary of Contents for LS5146 Important s

Reviews:

Related manuals for LS5146 Important s

Brands by name

Popular brands

VTech LS5146 Important s, Manual

Search results

Summary of Contents for LS5146 Important s

Reviews:

Related manuals for LS5146 Important s

Brands by name

Popular brands