VTech ErisTerminal VSP716A, Administrator And Provisioning Manual

Page: 33 / 204

Configuration Using the Phone Menus 33
Back to Contents
VSP716A Administrator and Provisioning Manual
Using the Security menu
On the Security menu, you can configure the phone lock feature, and enable or disable the
Web server. The Web server setting determines whether the embedded WebUI is available
from the phone.
The Phone Lock feature restricts certain hard keys and features unless the user enters a
PIN code. There are three escalating modes of lockout:

Restricted Config
only locks out the menu and voicemail.
When Restricted Config is enabled, the following keys/features are restricted:

MENU key

Settings soft key

Messages soft key

Messages PFK

Restricted Call locks out all advanced calling features, including transfer,
conference and hold, via hard keys, soft keys and PFKs. The phone operates only
in single call, single account mode.
When Restricted Call is enabled, the following keys and features are restricted in
addition to those restricted as part of Restricted Config:

SELECT key

UP , DOWN , LEFT , RIGHT keys

All soft keys not listed as part of Restricted Config

All PFKs

Outgoing Multicast

Outgoing Server-side Paging

Emergency Call Only
locks out all outgoing calls except emergency calls.
Emergency numbers must match the Emergency Dial Plan, as configured under
“General Account Settings” on page 41
.
Incoming calls are still allowed for all modes.
To use the Security menu:
1. From the
Admin Settings
menu, press

to highlight
Security
, and then press
SELECT . 
The
Security
menu appears.