VTech DS6472-6 User Manual Download Page 30

Page: 30 / 140

Bluetooth

Bluetooth setup

To use a Bluetooth enabled cell phone or headset with your

DS6472, you

must first pair and connect your Bluetooth device(s) with the telephone base.

All

DS6472 handsets can be used to make or answer on the cell phone line.

Bluetooth wireless technology operates within a short range (30 feet). When

you pair a Bluetooth cell phone or Bluetooth headset to the telephone base,

move closer to the telephone base to maintain sufficient signal strength.

Add a cell phone

Before you begin, make sure that you have cellular coverage and your

Bluetooth enabled cell phone is not connected to any other Bluetooth

devices. Refer to your cell phone user's manual to learn how to search for or

add new Bluetooth devices.
To pair and connect a cell phone:

Press

MENU

on the handset when it is not in use.

Press or to highlight

Bluetooth, then

press

SELECT

Press

SELECT

to choose

Add device, then press

SELECT

to choose

Add cellular. The handset

displays

Please wait... followed by 1. If cell is

connected to BT device, please disconnect it.

If there are already four paired devices on the

device list, the 4th device on the device list will be

automatically removed, regardless of whether the

new device pairing is successful or not (page 32).
If there are already two active devices on the device

list with prefix

D1: or D2:, the handset shows Only

2 devices can be ready for connection. You are

prompted to deactivate an active device.

Press

NEXT

. The handset displays

2. Place cell

phone next to base.

All devices that are connected to the telephone

base are disconnected until the pairing process

is completed.

1.
2.

•

BLUETOOTH

Add device

Device list
Download dir
Change PIN

BACK SELECT

ADD DEVICE

Add cellular

Add headset

BACK SELECT

Answering sys
Directory

Caller ID log
Intercom

Bluetooth

BACK SELECT

Summary of Contents for DS6472-6













































































































































Search results

Summary of Contents for DS6472-6

Reviews:

Related manuals for DS6472-6

Brands by name

Popular brands

VTech DS6472-6, User Manual

Search results

Summary of Contents for DS6472-6

Reviews:

Related manuals for DS6472-6

Brands by name

Popular brands