67
Multiple handset use
Answer a PTT call
You can respond to a PTT call whenever the speakerphone light is off, as
described below.
When your handset receives a PTT call, the handset beeps and displays
Press and hold [PTT] to talk.
When the other party is speaking, your speakerphone light is on, and your
handset displays
PTT From HANDSET X To handset: Y (X represents
the originating handset and
Y represents the destination handset; a
maximum of four handset numbers appear).
When your speakerphone light is off and the handset displays
Press and
hold [PTT] to talk, press and hold PUSH TO TALK on your handset.
When you hear a chirp, speak towards the handset.
While you are speaking, your handset displays
PTT To HANDSET X
(
X represents the handset numbers of one or more destination
handsets; a maximum of four handset numbers appear).
Your voice is broadcast to all destination handsets.
After speaking, release
PUSH TO TALK. Your handset will beep. After the beep,
if your speakerphone light is off, you can press and hold
PUSH TO TALK to
speak again or the destination handset can respond.
Change a one-to-one PTT to intercom call
You can convert a one-to-one PTT session to an intercom call.
When your handset displays
Press and hold [PTT] to talk, press
INTCOM
. Your handset displays
Switch to Intercom? Press
SELECT
to confirm.
If you have two handsets, your handset displays
Calling other handset.
The destination handset temporarily displays
Push to talk Ended and
then
Other handset is calling.
If you have three or more handsets, your handset displays
Calling
HANDSET Y (Y represents the destination handset). The destination
handset temporarily displays
Push to talk Ended and then Handset X
is calling (X represents the originating handset).
On the destination handset, press
/HOME/
FLASH
or
to answer the
intercom call. Both handsets now display
Intercom.
To end the intercom call, press
OFF/
CANCEL
,
END
, or place the handset in
the telephone base or charger. Both handsets display
Intercom ended.
1.
2.
3.
•
•
1.
•
•
2.
3.
