29
Bluetooth
Connecting devices
Up to four devices can be paired to the telephone base. All paired devices
are shown on the device list. To use a paired device, it must be in an active
slot (
D1 or D2) on the device list and connected. Only one Bluetooth cell
phone or a headset can be on a call at a time.
Once you have paired a device with the telephone base, you do not need
to repeat the pairing procedure again unless you delete the device from the
device list.
Review the device list
Press
MENU
on the handset when it is not in use.
Press or to highlight
Bluetooth, then
press
SELECT
.
Press or to highlight
Device list, then
press
SELECT
.
Connect/Disconnect an active device
While in the device list menu, you may connect or
disconnect your devices.
Press
MENU
on the handset when it is not in use.
Press or to highlight
Bluetooth, then
press
SELECT
.
Press or to highlight
Device list, then
press
SELECT
.
Press or to highlight a device when necessary,
then press
OPTION
.
Press or to highlight
Connect/Disconnect
(whichever is applicable), then press
SELECT
to confirm. The handset displays
Device
connected/Device disconnected. You hear a
confirmation tone.
1.
2.
3.
1.
2.
3.
4.
5.
When your device is connected, you will be prompted to
select
Disconnect. When your device is disconnected,
you will be prompted to select
Connect.
When connecting a Bluetooth device to the device list, all connected devices
will be temporarily disconnected until the procedure is complete. It may take
up to two minutes to reconnect.
BLUETOOTH
Add device
Device list
Download dir
Change PIN
BACK SELECT
DEVICE LIST
D1:Headset A
D2:Cell Phone A
Cell Phone B
Cell Phone C
BACK OPTION
1
Headset A
Connect
Remove
Rename
BACK SELECT
1
Answering sys
Directory
Caller ID log
Intercom
Bluetooth
BACK SELECT
