58
The answering
system does
not announce
the correct day
of the week
for recorded
messages time
stamp.
Make sure you have set
the date and time. See
Configure your telephone
section.
The messages
on the
answering
system are
incomplete.
The maximum length for
a message is four minutes.
If a caller leaves a very
long message, i.e., more
than four minutes, part
of it may be lost when
the answering system
disconnects the call.
If the memory on the
answering system
becomes full during a
message, the answering
system stops recording and
disconnects the call.
If the caller’s voice is very
soft, the answering system
may stop recording and
disconnect the call.
The answering
system does
not respond
to remote
commands.
Make sure you enter the
correct remote access
code.
Make sure you are
calling from a touch-tone
telephone. When dialing
a number, there should be
tones. If there are clicks,
then it is not a touch-tone
telephone and cannot
activate the answering
system.
The answering system
may not detect the
remote access code when
your announcement is
playing. Wait until the
announcement is over
before entering the code.
I subscribe to a
nontraditional
telephone
service that uses
my computer
to establish
connections,
and my
telephone
doesn’t work.
Make sure your computer
is powered on, and
your Internet is working
properly.
Make sure to plug your
USB telephone adapter
into a dedicated USB port
on your computer. Do not
plug into a multiple port
USB hub (USB splitter) that
is not powered.
In a few rare instances, the
USB port on your computer
may not have enough
power. In these instances,
try using a USB hub with
its own external power
supply.
If you are using a firewall, it
may prevent access to your
nontraditional telephone
service. Contact your
service provider for more
information.
I accidentally
set my LCD
language to
Spanish or
French, and I
don’t know how
to change it
back to English.
While the phone is not in
use, press
MENU
and then
enter
364#
to change
the LCD language back to
English.
