manualshive.com logo in svg

VTech DS6151 - 6.0 Expandable Cordless Phone, User Manual, Page: 7 / 99

Share
Download
VTech DS6151 - 6.0 Expandable Cordless Phone User Manual Download Page 7

3

Getting started

Telephone base installation (continued)

Use only the power adapter supplied with this product. To order a  

 

  replacement, visit our website at www.vtechphones.com or call  

 

  1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial  

 

  1 (800) 267-7377.

The power adapter is intended to be correctly oriented in a vertical or  

  floor mount position. The prongs are not designed to hold the plug in place  

  if it is plugged into a ceiling, under-the-table or cabinet outlet.

•

•

Figure Two: Installation with separate line jacks

Telephone base 

power adapter

Electrical outlet 

not controlled by 

a wall switch

If you have DSL 

high-speed 

Internet service, 

a DSL filter (not 

included) is 

required.

Telephone base

Connect the 

clear

 

telephone line cord to jack 

labeled 

LINE 1/L1+L2

.

Connect the 

black

 telephone 

line cord to jack 

labeled 

LINE 2

.

L1 telephone 

wall jack

L2 telephone 

wall jack

Charger installation

Plug the charger power adapter to an electrical outlet not controlled by a wall 

switch.

Summary of Contents for DS6151 - 6.0 Expandable Cordless Phone




































































































Reviews:

No comments