manualshive.com logo in svg

VTech DS6151 - 6.0 Expandable Cordless Phone, User Manual, Page: 43 / 99

Share
Download
VTech DS6151 - 6.0 Expandable Cordless Phone User Manual Download Page 43

39

Telephone operation

Answer an incoming call during an intercom call

If you receive an incoming call during an intercom call, there will be an   
alert tone.

To answer an incoming call with the handset during an intercom call:

To answer the call, press   for line 1 or   for line 2. The intercom call  
ends automatically.

-OR-

Press the 

BACK

 softkey to continue with the intercom call without 

answering the incoming call. Instead, the answering system answers   
the call.

To answer an incoming call from the telephone base during an  
intercom call:

To answer the call, press 

LINE 1

 or 

LINE 2

. The intercom call  

 

ends automatically.

-OR-

Press the 

BACK

 softkey to continue with the intercom call without answering 

the incoming call. Instead, the answering system answers the call.

•

•

•

•

Summary of Contents for DS6151 - 6.0 Expandable Cordless Phone




































































































Reviews:

No comments