Page
9
/
23
■ Controller Operation Status when Head FAIL Occurs
Due to the abnormal operation of the head, the head red light will be lighted, and the
Head Fail red light will be illuminated on the controller. The lamp for the failed head will
be turned on.
The LCD will
display “Err” test additionally.
■ Controller Time Reset Method
The VSC-104Z controller calculates the cumulative irradiation time automatically
and displays it on the LCD window in hours (The accumulation time of the
controller irradiation operation, not the time linked with the head). Based on this,
the replacement time of the head can be measured. Since the initialization is
necessary after replacing the head, the controller time can be reset as follows.
①
When the controller calculates the usage time of 10,000 hours, the head
indicator lamp 1, 2, 3 and 4 flash.
(Even if the replacement cycle comes, the head will operate normally if it is
not HeadFail.)
②
Press the Time Reset switch on the controller once to confirm that the time
on the LifeTime LCD is reset to 0 hours.
