Page
14
/
23
Remote Operation Procedure
①
Confirm that the head is installed in the shielded facility and the door with Interlock capability
is closed.
②
Turn on the controller's power switch.
※
The lamp on the front of the controller lights up for about one second.
③
If the Interlock is closed, the INTERLOCL lamp will be turned on.
※
Check whether interlocking operation (opening / closing) works normally.
④
Start the operation by the remote procedure.
Initiates irradiation when the Remote On signal is inputted to the device
Mode 1 (momentary) by remote control:
Remote on (Dsub 11-13) close at the initial moment of irradiation.
Remote on (Dsub 11-13) close during the desired irradiation ON period.
Remote OFF (Dsub 11-13) open to stop irradiation
Mode 2 (alternate) by remote control:
Remote on (Dsub 11-13) close at the initial moment of irradiation.
Remote OFF (Dsub 12-13) close to stop irradiation
