PWM SERIES - User Manual
Page
VSi-PWM-2018-06
19
http://www.VSi.
UK
.com
5.3 Hardwire Installation
Models PCM-3.5H-S25 to PCM-14H-S25
Remove Terminals Connection Cover Plate.
Ensure supply is isolated before making connections.
Connect the Input Cable to the terminal block (as indicated) and take
to mains supply via cable entry access hole in the enclosure.
Connect the Output Cable to the terminal block (as indicated) and
take to the load via the relevant cable access hole in the enclosure.
Check all wires are properly secured (using glanding – as
appropriate), connections are tight and cables are correctly wired
before switching on.
Refit Terminals Connection Cover Plate
