________________________________________________________________________________
VS SECURITY PRODUCTS
ZZ001203 - ZZ001204
Page 9 of 13
Operating Instructions
7.
ERROR
MESSAGES
If the DATAGONE is not performing correctly the following error messages may be
displayed.
To validate the message switch the unit off and the on again using the power switch
on the rear of the unit.
7.1
‘START UP ERROR’
‘EXIT SENSOR TRUE’
If this message is displayed the Input optical sensor may be contaminated with dust
or dirt. To resolve this problem the Input sensor will need to be cleaned. Please refer
to maintenance section 8.1.
7.2
‘EJECT ERROR’
‘SENSOR 1 JAMMED’
If this message is displayed the output optical sensor may be contaminated with dust
or dirt. To resolve this problem the sensors will need to be cleared. Please refer to
maintenance section 8.2.