________________________________________________________________________________
VS SECURITY PRODUCTS
ZZ001203 - ZZ001204
Page 7 of 13
Operating Instructions
4.
CONTROL PANEL
RESET
VS Security Products Ltd
DATAGONE
VSSP
5.
USING THE CONTROL PANEL
The DATAGONE degausser has been carefully engineered for convenience and
simplicity of operation. As such an LCD and push button are all that is required. The
features provided are outlined below:
5.2
Power Indicator
The LCD is used as a power indicator and will illuminate whenever power is applied.
The power switch is part of the IEC power connector module mounted on the rear
panel.
5.3
Reset Button
Once you have placed media in the unit the degauss cycle will automatically start. If
the degauss cycle is interrupted and the media fails to eject the reset button should
be used to eject the media and reset the degauss cycle. The user should then
attempt a repeat erasure. The LCD panel will display the progress, completion of the
cycle and total number of degauss cycles completed.
If the LCD repeatedly indicates a failure you should contact your nearest VS Security
Products support department for further assistance.
LCD Display
Reset Button