Using one hand, slightly push the arms of
the standard comb guide together. Take
the stubble comb guide and line the two
inserts up with the two lugs on either side
of the standard comb guide. Simply hold
the stubble comb guide in place and then
release the pressure from the standard
comb guide. The two comb guides should
now be connected (Image 3).
Push the standard comb guide down onto the trimmer until it
‘clicks’ into place. This should then secure the comb guide into
place.
USING ThE FOIL ShAVER ATTAChMENT
Your i-trim stubble
+ includes an interchangeable foil shaver
attachment to give you a clean, sharp edge to your stubble. It can
also be used to shave in hard to reach areas, such as around the
ears and nape of the neck.
(
NB
– Never hold the shaver head by the foil, as this could cause
damage. Always inspect the shaving foils for signs of damage.
Never shave with a damaged foil, as this may cause injury).
To attach the foil shaver attachment, remove the comb guide by
adjusting the cutting length on the trimmer to the longest length
setting (15mm). Switch the product off and then pull the comb
guide upwards to remove.
You will need to remove the blade from the
i-trim stubble
+ before attaching the foil
shaver attachment. To remove the blade,
hold the handle of the trimmer with one
hand and place your free hand on top of
the trimmer head, with the thumb placed
at the back of the blade. Place your index
finger and middle at the front of the blade.
Using your index and middle fingers, pull the
blade backwards and click off the trimmer
(Image 4). Place the blade in a secure place.
Image 2
Image 1
Image 3
