CLEANING AND MAINTENANCE
To maintain optimum performance, the appliance should be cleaned
after each use:
1. Switch trimmer off and remove the power supply, if connected.
Remove comb cutting guide.
2. To make cleaning easier, remove the blades from the trimmer.
To remove the blades, hold the handle of the trimmer with one
hand and place your free hand on top of the trimmer head, with
the thumb placed at the back of the blades. Place your index
finger and middle at the front of the blades. Using your index
and middle fingers, pull the blades backwards and click off from
the trimmer. Place the blades in a secure place.
3. Use the cleaning brush supplied to brush away hair and debris.
4. Ensure that you do this after each use and before storing away.
5. When used regularly, the blades will not need to be oiled,
however if the trimmer has not been used for a prolonged period
of time, then it is advisable to apply a small amount of lubricating
oil (provided) to the blades before using. This helps to keep the
blades as sharp as possible.
To maintain optimum performance of the foil shaver, the attachment
should be cleaned after each use.
1. To clean, simply remove the foil shaver by pressing the two release
lugs on either side of the head. The foil shaver should then come
away from the head (refer to ‘Using the Foil Shaver Attachment’
for further information).
2. Use the cleaning brush supplied to brush away hair and debris
from the foil shaver attachment and head.
3. Re-apply the foil shaver to the head by lining up the lugs and re-
attaching the foil shaver and head together.
