Baud Rate Options: 1200BIT/S
、
2400BIT/S
、
4800BIT/s
、
9600BIT/s
3.1.4 RS-485 Bus Matching Resistance
For central controlling, the matching resistance should be set for the device that is furthest away
from the controller. There is an end matching resistance switch on SW2. The 8
th
bit of SW2 shows
ON status (see chart below) which means the BUS matching resistance has been connected.
3.2 Installation, Connection
Attention!
1. Installation should only be handled by a qualified CCTV expert.
7
Summary of Contents for VPTZ500
Page 3: ...2...
