.
IV. VKB300/VKB200 Keyboard Control Use Instruction to VPTZ500 Dome Camera
Use the VKB300 keyboard controller to realize the complete potential of the VPTZ500 intelligent speed dome.
(The VKB300 keyboard control protocol is set as the default protocol for the VPTZ500.)
4.1Setting and Adjusting Preset Position
The Preset function is the dome’s default level angle, lean angle and camera focal length in EMS memory.
By using this saved parameter, the dome and camera can run to the preset positions when it is required.
Operator can save and adjust preset positions by using the VKB300/200 control keyboard; the VPTZ500
dome can support 128 preset positions.
4.1.1 Setting Preset Position
Adjust the VPTZ500 camera to the desired position using the VKB300/200 keyboard joystick/rocker
(including location, camera zoom, focus and iris), and then input the required preset position number.
The inputted preset position value No. is displayed at the bottom of the LCD “DATA” area. Press Shift +
Call, to confirm position. The preset position at “DATA” disappears showing that the preset position was
set successfully.
For example: Set No.1 preset position
1. In the Main Menu screen, Press CLR to Clear the data. The keyboard displays:
2. Enter the Preset Position Number you wish to set
Ex. Set Preset Position No. 1, the keyboard displays:
Displays the Preset Position
Number (1-128)
3. Adjust the VPTZ500 camera to the desired position including location, camera zoom, focus and
iris.
11
Summary of Contents for VPTZ500
Page 3: ...2...
