background image

E800 RFID IP Phone - User Manual

Dial Outside 

Phone No.

Talk to 

Destination 

Extension

Press the Fast 

Flash Line 

Key of 

Original Party

Talk to 

Original Party

Condition

1. During transferring, the LED of corresponding Line Key is changed to fast flash.
2. When the call is transferred, the LED of corresponding Line Key is off.
3. This feature supports call transfer in different conditions: Screened Transfer and 

Unscreened Transfer.

4. Screened Transfer : the user consults the destination party before transfer the call.
5. Unscreened Transfer. the user transfers the call to the destination party without 

consulting the party.

6. The extension is allowed to use this feature in System Programming.

3.4.6

CALL TRANSFER TO ON-HOLD PARTY

The user can transfer a call to other extension or outside party which is held by the user.

Operation

During a conversation-

or

Press 

TRANSFER 

Key

Shutter Dial 

Tone

Press Line 

Key which is 

held

On-hook

Press 

RELEASE 

Key

Condition

1. During transferring, the LED of corresponding Line Key is changed to fast flash.
2. When the call is transferred, the LEDs of corresponding Line Keys are off.
3. The extension should be allowed to use this feature in System Programming.

3.4.7

CALL PARK

The user can park a call in Common Call Park and the parked call can be retrieved in 
other extension.

Operation

31

Summary of Contents for E800 RFID
























































































Reviews: