E800 RFID IP Phone - User Manual
3. Call Pickup-Extension Access Code is “*1XXXX” where XXXX is the extension
number.
3.3.4
CALL REJECT
This feature allows the user to reject an incoming call. The rejected call will be
forwarded to destination party of Call Forwarding-Busy.
Operation
When there is an incoming call, a corresponding Line Key is fast blinking and the Line
Key Number, Caller ID and REJECT Soft Key are displayed on LCD-
Press
REJECT Key
Condition
1. The incoming call will be forwarded to destination party of Call Forwarding-Busy if
the user reject the call.
2. If Call Forwarding-Busy feature is not enabled, the caller will receive busy tone.
3.3.5
MISSED CALL
If an incoming call has not been answered, a message “1 Missed Call” will display on
LCD Display in on-hook condition. The message indicates that there is a missed call
before. The user may check the Missed Call Log or All Call Log and call back the
party.
Condition
1. If an incoming call has not been answered, a message “1 Missed Call” will display
on LCD in on-hook condition.
2. The number beside “Missed Call” message indicates how many call was missed.
3. The user may check the Missed Call Log or All Call Log and call back the party.
4. If the user have entered Missed Call Log or All Call Log to check the record, the
missed call message will be canceled.
5. If the incoming call is for an extension hunting group and is answered by one of the
extension of the group. There will not have missed call message for this call.
6. Refer to Missed Call Log section to check the missed call record.
7. Refer to All Call Log section to check the missed call record.
3.4
DURING A CONVERSATION
3.4.1
MUTE
The user can disable the microphone in handset or speakerphone mode to consult
privately with others during a conversation.
Operation
24
