© 2017 Van Putten Instruments BV | MAN-VP-SINL-UK | Revision:1701 | Date:22-03-2017
14
VPFlowScope in-line
Check the pipework and the O-rings, which are pre-mounted on the pipes. Apply a little O-ring grease
to ease the mounting process. Screw both pipes into the VPFlowScope in-line. Gently screw the
pipes into the flow meter inlet. Turn it all the way in, until the end of the pipe reaches the bottom of
the inlet hole
You can install the VPFlowScope in-line directly between two threaded pipe ends. The connection is
BSP outer straight thread; 0.5", 1" or 2" depending on the VPFlowScope in-line model. If necessary
you can ask our sales team to supply NPT thread on the tubing, or you can chase the thread
yourself with a die.
