32
Smart box mounting
The Smart box should be mounted in a protected
location.
Note: The Smart box should be mounted
according to the direction arrows (up and front) on
the Smart box pointing up and towards the front of
the vehicle.
This is absolutely necessary to have the
roll and pitch measurement, and weight compensation,
working.
Make sure that the mounting surface is flat and clean
before the Smart box is fastened. A recommended
position would be on the inside of the truck or trailer
frame. Fasten the Smart box by firmly tightening all
four screws. The tightening force of the screw will be
applied to the bushing so there is no risk of damage to
the high strength plastic enclosure.
All Smart box connectors must be removed before
tightening or loosening any of the screws to avoid
damage to the connectors.
To be able to connect and disconnect the cable
connectors there must be at least 10” of space
(horizontally) for the Smart box. About 7” of height is
needed as well.
Unused Smart box connectors must be covered
with connector covers.
A B
5 6
3 4
1 2
FRONT
UP
9150 JBOX
VISHAY
PRECISION
GROUP
10" / 250 mm
7" /
180
mm
Uncovered open connectors are soon ruined
in the harsh environment under a truck.
Summary of Contents for SI Onboard 9150
