14
Diagnostics
With the diagnostics, the system can be examined in
case there is a problem. It gives a graphical overview
of each device in the system, Meter and all Smart
boxes. By pressing the F3 key ‘Next’ some general
info as S/N etc. together with possible error information
is displayed.
The detail information is either general Smart box
details (roll/pitch angle, internal temperature etc.) or
per input details (weight, input signal exc. voltage and
exc. current). This information can be used to aid
during troubleshooting.
Maintenance
The Smart box
restore function
is used when a
Smart box has
been
Intuitive Diagnostics Designed to
Maximimize
efficiency and
Minimize
down time
VISHAY
PRECISION
GROUP
SI Onboard 9150
Choose what you
want to
troubleshoot
5
6
Escape Meter JBox 2 Info
Diagnostcis: JBox 1
JBox #1
1
2
3
4
9150 shows the current
state of all components.
Green is good
×
Red is BAD
Net Weight:
------------ lb
Too low excitation current! (Err 21)
- Check load cell cable and connectors!
- Check load cell
- Sawp two input connectors on the JBox to pinpoint the error
source!
Escape JBox Input 2 Details
Diagnostcis: JBox 1, Input 1
In-depth detail of all
Smart boxes,
sensors and 9150
display
Summary of Contents for SI Onboard 9150
